How to Safely Transport Boom Lifts: Step-by-Step Guide

Lifting platforms are essential tools for a wide variety of work at height, from construction to window cleaning. However, before you can start using a Lifting platform, must be safely transported to your workplace. In this guide, we’ll provide you with the key steps for transporting boom lifts.

Step-by-step guide on how to safely transport a boom lift

1. Refer to the user manual

Before starting any transport activity, the first thing to do is to readthe user manual of the lifting platform. Each platform model has different transport requirements and specific recommendations for preparing the platform for transport.

2. Load the lifting platform correctly

Before mooring the platform, you need to make sure that it has been loaded correctly and that the right equipment is being used for transport. Make sure that the base of the basket is level and parallel to the transport trailer. If this cannot be achieved due to the length of the platform or trailer, consult the operator’s manual for additional guidance.

3. Inspect the lifting platform

Before starting transport, it is important to inspect the entire platform for any loose or unsecured items. Be sure to always use a turret rotation lock pin, remove the key and turn off the lifting platform before starting transport.

4. Secure the basket

Before securing the platform basket, check that it is folded. The nylon straps should be placed parallel to the machine guides and carefully so as not to apply too much downward force to secure them. Place some type of material that can absorb forces, such as foam, rubber or wood, on the side opposite the nylon strap to reduce any movement during transport.

5. Securing the chassis

The platform chassis must also be secured to the transport platform using a minimum of six chains. Make sure that the chains have sufficient load capacity and adjust the tie-down in such a way as to avoid damage to the chains or platform.

6. Unload the lifting platform safely

Once the platform arrives at the workplace, you need to consider how to download it safely. If you are going to unload the platform on a public road, you have to take Additional Precautions, such as the use of warning cones, hazard marking tape, signage, and signaling personnel. All of these options will help unload the transport trailer safely, avoiding accidents to personnel on the job site and drivers from the road.

Conclusion step-by-step guide

In conclusion, transporting lifting platforms may seem like a simple job, but it is important to follow the proper steps to do so safely and efficiently. Before starting transport, it is essential to read and follow the user manual to prepare the specific platform and avoid problems during the transfer.

Remember that the loading and location of the platform must be correct and safe, and that additional precautions must be taken if it is to be unloaded on a public road. With a correct mooring of the platform, using chains and nylon straps, you will be able to transport small and large lifting platforms without problems.

If you have any questions about the transport of lifting platforms, do not hesitate to consult a Liftisa expert advisor. Safety is top of mind in any workplace, and lifting platform transport is no exception. By following the proper steps and taking the necessary precautions, you will be able to Transporting your boom lifts safely and smoothly.